The Inferno MP9 WC kit was a Limited Edition kit and is no longer available. Please order the KYO317858 Inferno MP9 TKI2 kit instead as it is now the current version of the car.
The Kyosho Inferno MP9 TKI2 WC
Limited Edition:
Now
you can own and race the same 1:8th
scale buggy that took Team Kyosho International
(TKI) driver Cody King to victory at the 2010 World Championship race
in Thailand. The new “WC” edition Inferno MP9 includes all the upgrades made to
the MP9 for the Worlds race.
The track in
Pattaya Thailand was an incredibly hostile and tough with concrete takeoff and
landing areas on jumps as well as gangly welded iron fences lining the track. At
the Worlds warm up race it took its toll on most the buggies that competed.
Changes had to made to most manufactures cars deal with the exceptionally
difficult conditions just to be sure that the buggies could finish an hour long
main. Even though the Kyosho Inferno
MP9 TKI2 buggies had no major failures at the warm up race, they decided to
update some parts and give them out to all the team drivers for the World Race
just to be sure. The inferno MP9 WC Edition includes these strengthened and
revised parts for you to add to your ability to win. Check the list below
listing the new parts and changes that have been made.
Cody and Paul King
(Cody’s Dad and master mechanic) along with the Inferno MP9’s designer
Yuuichi Kanai
found that it also helped to move the receiver battery from the stock location
on the Inferno MP9 TKI2 to a forward position and made modifications to
accommodate this change. This was adopted by Cody King and most the Kyosho team
drivers as well in Thailand due to the improved handling with the change in
weight balance. The Inferno MP9 WC Edition kit also includes the new parts
needed to replicate this setup change.
Along with all the other improvements
recently made to the TKI2 edition Inferno MP9, this is the most advanced 1:8th
scale buggy ever produced! Kyosho and
Yuuichi Kanai’s Infernos have
won the 1:8th scale off road buggy Worlds 8 times, many more times
than any other manufacturer.
Kyosho’s commitment to the
serious RC racer with
a no cost, no holds barred attitude, have always paid off! Using the best
materials available in the world along with incredible engineering and fit and
finish, you will not find a more committed group of people behind you as an
owner of an Inferno than the group from Kyosho!
The Inferno MP9 THI2 WC is made entirely
in Japan.
Also, don’t
forget that the Inferno MP9 TKI2 also won
the 2010 ROAR Nationals driven by Kyosho Team driver
Jared Tebo as well as TQ’d the Worlds
in Thailand also driven by Jared Tebo!
![Kyosho Inferno MP9 TKI2 ROAR 2010 Champion](https://www.infernosonly.com/v/vspfiles/photos/KYO31785B-28T.jpg?235.7908)
New on the
Inferno MP9 WC Edition:
·
Thickened and strengthened
front and rear 7075 aluminum CNC machined suspension holders
·
Stronger and thicker
reinforced 7075 aluminum CNC machined front shock tower.
·
Stronger and thicker revised
rear shock tower with additional lower control arm mounting positions, from 8 to
10 total.
·
Receiver battery
modification kit included (IFW423) to duplicate Cody Kings battery setup. Uses a
carbon fiber plate that fits perfectly to the servo tray.
·
New front lower control arms
with re-enforcement using additional material around the inner hinge pin as well
as the area around the sway bar mount to reduce the change of a breakage.
·
New rear upper suspension
arms with added ribs for more strength and stiffness around the ball ends.
Features included from the Inferno MP9
TKI2 Edition:
·
Re-designed more aerodynamic
Body that improves down force and clearance for the Air filter system KYOIFB005.
·
Re-designed high flow oval
Air filter system, KYOIF469 that now mounts to the center section. Requires New
TKI2 Body for proper fit.
·
Treaded shock bodies instead
of the original spacer style, front KYOIF471-01 and rear KYOIF470-01
·
Harder and stronger outer
rear hinge pins KYOIFW415 that are not as brittle as the MP9 TKI1 versions.
·
Includes KYOIFW407 milled
7075 rear suspension holder
·
Includes KYOIFW414 milled
7075 rear hubs
·
Revised rear shock tower
KYOIFW408 and shorter medium length rear shocks, KYOIF470 for a lower CG and
weight in the rear of the buggy.
·
White colored suspension
bushings, KYOIF422W
·
New longer lower kingpins
and kingpin collars, KYOIF467 to add more reliability in a big crash
·
Stronger and harder front
upper arms to reduce wear and improve strength in a crash by adding material and
harder composite, KYOIF428B.
·
Revised inner and outer
steering balls that eliminate the steering tie rods from popping off in a bad
accident; KYOIFW416 and KYOIFW417.
·
Foam dust cover, KYOIF475
for the steering servo saver to reduce wear on the pivot joint.
·
Includes KYOIFW401 7075
aluminum radio tray posts
·
Includes KYOIFW402 wing stay
7075 aluminum post
·
Black finish on all the
turnbuckles, no longer gold in color
·
New Chassis with matching
Anodizing to the other aluminum parts on the car
·
New side guards that fit the
chassis plate, KYOIF474.
·
Revised brake disks KYOIF468
for more consistent stopping power as well as lighter weight
·
New lighter stiffer and
stronger Dish Style racing wheels KYOIFH004 in white
·
Different spring rates
(Light Blue) for the front and rear shocks,
KYOIF350-714 for the front and KYOIS106-814 for the rear
·
Special Tapered hole shock
pistons KYOIFW405-138 in the front and KYOIFW405-148 in the rear for enhanced
dampening action
·
Revised Shock plastic parts
set KYOIF346-05B
·
New Fuel Tank KYOIF444B with
re-designed fuel door pull and revised internal dampening that resists air
getting into line better
Main Inferno MP9 Engineering
Features:
·
Captured Hinge pins, no more
e-clips
·
Eccentric inserts for
suspension block changes
·
4 positions for width
changes on blocks
·
Many more tuning options any
other buggy on the market today
·
Hex screws instead of
Phillips
·
Includes CNC 7075 machined
aluminum steering knuckles
·
Side guards that wrap around
the car for more protection from hits and dirt. There is another feature built
into the side guards that we will find out about later!
·
Steering link on the inside
of the chassis
·
Steering servo squeezed into
the center of the chassis
·
Nylon locking wheel nuts
·
Maximum durability with
specially selected, high quality materials
Large
Diameter Center Differential
·
To improve consistency in
long mains the center differential has been increased in size by 5mm.
·
This increases the internal
oil volume and helps the differential maintain consistency in 1 hour or longer
mains.
Durability:
·
The entire car and all its
parts are completely manufactured in Japan to improve consistency in quality.
·
Only 7075 aluminum is used.
·
Specially designed
no-compromise composite plastics are used in the Inferno MP9. These composites
are what make the Kyosho models stand out from the crowd and have been
formulated over decades for maximum strength and durability.
·
Same goes with all the
metals in the MP9 they have years of development behind them to ensure maximum
performance and usable life.
·
A Kyosho may be more
expensive to purchase in the front end but, due to the long life of components
and durability of the design, the cost of ownership is much less than any other
brand!
Drive
Train:
·
Ultra-Light weight drive
train components improve the responsiveness and crispness of throttle and brake
inputs; this is the lightest, and strange enough, the most durable drive train
available on a buggy today.
·
The smallest and most
consistent differentials available in a 1:8th buggy, add to the light
weight drivetrain.
·
The Differential outdrives
are now lightened by machining and drilling them.
·
The Drive shafts are are
made from lighter thinner and stronger Chrome Molly steel.
·
Differentials have been
lowered in the chassis.
·
Smaller Bulkheads.
·
Overall the drive train is
over 200g lighter than the Inferno MP777!
Conclusion:
With all the information covered here, it should be quite obvious that the new
Kyosho Inferno MP9 TKI2 World Championship Edition is the State of the Art 1/8th
buggy today, and has the heritage and capability to take Cody King or
you to the highest level of
competition!
Specifications:
Length:
490 mm
Width:
307 mm
Height:
180 mm
Wheelbase:
325 mm
Ground clearance:
about 28 mm
Track (v & h):
254 mm
Gear ratio:
11,7:1
Weight:
3,300 g